Primary Applications

4-E Spin-Clean filters force incoming water through a directional nozzle plate. This creates a high velocity, centrifugal action which forces debris to rotate down the stainless steel screen to the debris holding basin at the bottom of the filter where it may be easily flushed out via the valve provided.

Specifications

• 1" MPT Inlet x 1" MPT Outlet
• BSP thread available
• Large screen area provides 23.4 sq.in. of filtration surface
• Maximum recommended flow
  • 1" Filter: 18 GPM
  • 1-1/2" Filter: 55 GPM

Features

Plastic Spin-Clean Filters are designed to use a directional nozzle plate on the interior of the stainless steel screen. The spinning action keeps the debris in suspension to collect any discharge in the basin.

• Plastic construction is light in weight and chemical resistant.
• Unique Spin-Clean centrifugal action keeps screen clean far longer than any conventional screen filter of the same size. Greatly extends service intervals.
• Two-Piece threaded housing with O-ring seal for easy maintenance.
• Strong, stainless steel screens available in mesh sizes of 30, 50, 100, 150, (standard) and 200.
• Available with threaded cap or ball valve for flushing debris basin.
• Plastic Filter sizes: 3/4", 1", 1-1/2", and 2", (MPT)
• ABS models rated to 80 psi
• Engineered plastic models rated to 150 psi

Copyright ©1995-2008 by Travis Irrigation Plans & Supply. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission is prohibited.
Read our important legal as well as our privacy and security information.

Email us with technical questions concerning these products at info@watertips.com
For questions about prices or ordering these items, contact sales@watertips.com
If you see an error on this page, please contact webmaster@watertips.com and be sure to include the URL of the page.