Note: All Hunter PGP-ATR rotor srinklers come with a #7 PGP standard nozzle.
If you need a different nozzle you can order them in sets from this page.
Click here to learn more about Hunter PGP-ATR nozzles.

Want to learn more about Hunter PGP-ATR rotors?
See our PGP-ATR installation and adjustment instruction pagefor more information.

Note:
The Hunter PGP-ATR sprinkler is designed to retrofit into a Rain Bird Maxi-Paw impact sprinkler case. Use of the PGP-ATR eliminates most of the problems associated with open case impact sprinklers such as clogging with grass and dirt.

It is highly recommended to purchase a Mini-Maxi Paw Wrench to remove the old sprinkler mechanism and replace the PGP-ATR mechanism.

Easily Upgrade Impact Sprinklers to Modern Gear Drive Technology

Looking for an easy maintenance, high performance alternative to the grit, contamination and tampering problems so common to impact sprinklers? Hunter introduces the easy way to upgrade your existing impact heads to modern gear drive technology - the Hunter Advanced Technology Impact Replacement (ATR). Now you can say goodbye to your inferior method of irrigation and say hello to the superior quality of the PGP.

The Hunter sprinkler that has become the industry standard and world's best selling rotor, PGP has been adapted into this innovative new model, created specifically to be compatible with common impact canisters that house plastic impact sprinklers. Thus, with no digging or lawn disruption, in a matter of minutes, you can repair an existing head or upgrade an entire outdated system to gear drive rotors.

PGP-ATR Features and Benefits
 

Integral rubber cover
Keeps dirt out, won't fall off

Available: 12 standard or 7 low angle nozzles
Outstanding flexibility an superior water distribution

40° - 360° adjustable arc version
For fastest, hassle-free adjustment, wet or dry

Proven long-life gear drive
The PGP was first introduced over 15 years ago and still continuously improved

Large dirty water screen
Puts an end to nozzle clogging

Whisper-quiet gear drive
Eliminates impact clatter

Closed-case sealed drive
Mechanism safe from debris

Factory-installed nozzle
Matches common impacts

Slow, even rotation
For better pattern control, less overspray

No digging
No pipe fittings required to change sprinklers

Compatible with many common impact canisters

Operating Specifications

• Discharge rate: 0.5 to 14.4 gpm (0,11 to 3,27 m3/hr; 1,9 to 54,5 l/m)
• Radius: 22 feet to 52 feet (6,7 to 15,9 m)
• Pressure range: 30 to 70 psi (2,1 to 4,8 bars; 206 to 482 kPa)
• Precipitation rates: approximately 0.4 inches (10 mm) per hour at 50 psi (3,4 bars; 344 kPa) for spacings from 25 feet to 45 feet (7.6 to 13.7 m)
• Nozzle trajectory
  • standard: 25°
  • low angle: 13°
• 3/4 inch fem. inlet
• Exposed diameter: 1 3/4 inch (4 cm)

Dimensions

• Overall height
  • PGS- 7 3/8 inches (19 cm)
  • PGP-ATR- 7 3/8 inches (19 cm)
  • PGH- 17 inches (43 cm)
• 3/4 inch female inlet NPT
• Exposed diameter: 1 3/4 inch (4 cm)

Warranty

Hunter Industries warrants all Hunter Professional Series PGP-ATR rotors to be free of defects in materials or workmanship under normal use for a period of two (2) years from the original date of manufacture. If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at it's option, the product or defective part.

Note: All Hunter PGP-ATR rotor srinklers come with a #7 PGP standard nozzle.
If you need a different nozzle you can order them in sets from this page.
Click here to learn more about Hunter PGP-ATR nozzles.

Want to learn more about Hunter PGP-ATR rotors?
See our PGP-ATR installation and adjustment instruction pagefor more information.

Copyright ©1995-2008 by Travis Irrigation Plans & Supply. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission is prohibited.
Read our important legal as well as our privacy and security information.

Email us with technical questions concerning these products at info@watertips.com
For questions about prices or ordering these items, contact sales@watertips.com
If you see an error on this page, please contact webmaster@watertips.com and be sure to include the URL of the page.