The Hunter ROAM Remote

Conveniently activate sprinklers without walking back and forth to the controller. Easy to use with plenty of range for residential and light commercial systems.

Feeling like you need to be in two places at once? Finally, you don't need to walk back to the controller to stop and start a manual watering cycle. The ROAM Remote lets you do just that: Roam wire-free for simple remote operation. The mid-range solution for residential and commercial applications, the ROAM will operate up to a 1000-foot range. Keep your cool during winterization; get it done quickly and easily with only one worker instead of two. For use with Hunter controllers with SmartPort connections, the ROAM offers features other remotes cannot, at a price we all like. With a large LCD and simple push button operation, this remote is tough enough for anything with its sturdy ABS construction, but small enough to fit in your pocket. On hand and in demand.

Hunter ROAM Remote Control Kit

ROAM Features and Benefits:

Remote operation of any station or program
Operate it from up to 1000 ft (305 m) away

128 different programmable security codes
Allows multiple ROAM systems to be used in the same area

Variable run times
Modify the run time without changing the regular program

Uses 4 AAA batteries (included) for up to 1 year of operation
Automatic Shutoff extends battery life

The ROAM Remote conveniently attaches to the controller
Always ready to go

Compatible with most Hunter controllers
Designed to work with Hunter ICC, Pro-C, and SRC controllers through a SmartPort® connection (included)

Operating Specifications:

• Address range: 0-127
• Maximum stations supported: 240
• Run Time: 10 settings from 1 to 90 minutes
• Range: up to 1000 feet (May vary depending on local conditions.)

Electrical Specifications:

• Power Source Transmitter: (4) AAA Alkaline Batteries
• Power Source Receiver: 24VAC, 0.010Amps (from controller)
• Receiver type: Superheterodyne
• Operating frequency: 433.925MHz

Default Settings:

• Address = 1
• Number of stations = 15 (may be varied from 1-240)
• Run Time: 2 minutes

Wiring Harness/Connection Kit

To utilize the ROAM Remote Control System, your controller must be equipped with the ROAM wiring harness/connection kit. This wiring harness provides the communication port where the ROAM receiver is attached.

A wiring harness and installation instructions are provided in this kit. Additional wiring harnesses can be purchased separately to allow you to utilize the transmitter and receiver with additional controllers.

The ROAM remote Control Kit is designed to work with the Hunter PRO-C and Hunter ICC controllers.

Warranty

Hunter Industries warrants all Hunter Professional Series ROAM remotes to be free of defects in materials or workmanship under normal use for a period of two (2) years from the original date of manufacture. If a defect in a Hunter product is discovered during the applicable warranty period, Hunter will repair or replace, at it's option, the product or defective part.

Copyright ©1995-2009 by Travis Irrigation Plans & Supply. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission is prohibited.
Read our important legal as well as our privacy and security information.

Email us with technical questions concerning these products at info@watertips.com
For questions about prices or ordering these items, contact sales@watertips.com
If you see an error on this page, please contact webmaster@watertips.com and be sure to include the URL of the page.