Large (tan) Waterproof Twist on Wire Connectors

• Use for connecting most "ground" wires to valves
• Suitable for use with two (2) 16 ga. wires plus one stranded valve wire
• No soldering needed
• Available in bags of 15 twist on wire connectors per bag

Small (blue) Waterproof Twist on Wire Connectors

• Use for connecting "hot" wire (or last "ground" wire) to valve
• Suitable for use with one (1) 16 ga. wire plus one stranded valve wire
• No soldering needed
• Available in bags of 20 twist on wire connectors per bag

Each waterproof twist on wire connector is prefilled with sealant. Just screw it securely onto the ends of the wires you wish to seal and you're done with the joint. Fast and efficient.

For most valve "ground" connections, you will have a solid white ground wire coming to the joint, a solid white ground wire going to the next valve, and a stranded wire going to the valve solenoid (a total of three wires). For these connections, use one large (tan) waterproof twist on wire connector.

For the last valve "ground" connection, you will have a solid white ground wire coming to the joint and a stranded wire going to the valve solenoid (a total of two wires). For these connections, use one small (blue) waterproof twist on wire connector.

For most valve "hot" connections, you will have a solid red hot wire coming to the joint and a stranded wire going to the valve solenoid (a total of two wires). For these connections, use one small (blue) waterproof twist on wire connector.

Copyright ©1995-2008 by Travis Irrigation Plans & Supply. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission is prohibited.
Read our important legal as well as our privacy and security information.

Email us with technical questions concerning these products at info@watertips.com
For questions about prices or ordering these items, contact sales@watertips.com
If you see an error on this page, please contact webmaster@watertips.com and be sure to include the URL of the page.